Your new That’s My Seat custom chair just arrived! Follow these simple steps for quick assembly:
Chair Assembly

Step 1
Begin by opening the box. Peel the tape from the top of the box. DO NOT use any sharp objects, this could damage your chair!
Remove the bag from the chair, the legs should be
located in the seat of the chair.


Step 2
Remove the legs and hardware from
packaging.


Step 3
Turn the chair over and align the legs with the pre-drilled holes in the base of the uni.


Step 4
Using the included bolts, start each bolt by hand. Install the leg bolt aligning it with the threads in the base.


Step 5
Tighten the bolt down with the included Allen wrench. DO NOT use a drill, doing so could strip the thread. Repeat the process for the remaining three legs.




Step 1
Begin by opening the box. Peel the tape from the top of the box. DO NOT use any sharp objects, this could damage your chair!
Remove the bag from the chair, the legs should be
located in the seat of the chair.


Step 2
Remove the legs and hardware from the package.


Step 3
Flip the chair over and place the wooden dowel in the hole on the base.


Step 4
Align wooden dowel in chair base with dowel hole in the chair leg.


Step 5
Align leg bolt with the threads in the base and tighten the bolt down with the included Allen wrench. DO NOT use a drill, doing so could strip the thread. Repeat the process for the remaining three legs.




Step 1
Begin by opening the box. Peel the tape from the top of the box. DO NOT use any sharp objects, this could damage your chair!
Remove the bag from the chair and chair back.


Step 2
Place the chair back in the seat of the chair.


Step 3
You will notice the male bracket on the back and the female bracket on the base. Make sure you slide the male end of the bracket inside the female end of the bracket for a secure connection.
*Notice if the male end of the bracket does not go perfectly into the female end, the back could become loose.


Step 4
Make sure you firmly push down on the back to wedge
the brackets together for a secure connection.